Introduction

This guide will provide the necessary steps to replace the LCD screen from the Alcatel OneTouch Evolve 2.

Turn off the phone before proceeding with disassembly to prevent shock and potential shorting of any electrical somponents. Remove the back cover using one of the plastic opening tools and the slit in one of the corners. Be gentle when prying so as to not wear out the tool.
  • Turn off the phone before proceeding with disassembly to prevent shock and potential shorting of any electrical somponents.

  • Remove the back cover using one of the plastic opening tools and the slit in one of the corners.

  • Be gentle when prying so as to not wear out the tool.

Add Comment

Remove the battery using one of the plastic opening tools and the dome-shaped indent next to the battery face.
  • Remove the battery using one of the plastic opening tools and the dome-shaped indent next to the battery face.

Add Comment

Unscrew the four 4mm JIS screws in each corner using the J000 screwdriver head. Turn the screws counter-clockwise to loosen.
  • Unscrew the four 4mm JIS screws in each corner using the J000 screwdriver head. Turn the screws counter-clockwise to loosen.

Add Comment

Insert a plastic or metal spudger between the front cover and rear frame in one of the areas indicated by the red squares and gently pry the rear frame loose. Repeat the process all the way around the phone until the rear frame comes loose. Insert a plastic or metal spudger between the front cover and rear frame in one of the areas indicated by the red squares and gently pry the rear frame loose. Repeat the process all the way around the phone until the rear frame comes loose. Insert a plastic or metal spudger between the front cover and rear frame in one of the areas indicated by the red squares and gently pry the rear frame loose. Repeat the process all the way around the phone until the rear frame comes loose.
  • Insert a plastic or metal spudger between the front cover and rear frame in one of the areas indicated by the red squares and gently pry the rear frame loose. Repeat the process all the way around the phone until the rear frame comes loose.

Add Comment

Pull the rear frame off with your hands. Pull the rear frame off with your hands.
  • Pull the rear frame off with your hands.

Add Comment

Use a plastic opening tool to pop the speaker press-fit connector free. Slide the edge of the tool under the connector and gently lift up on the edge; the connector should pop free with little force.
  • Use a plastic opening tool to pop the speaker press-fit connector free.

    • Slide the edge of the tool under the connector and gently lift up on the edge; the connector should pop free with little force.

Add Comment

Use a plastic opening tool to lift the front camera press-fit connector free.
  • Use a plastic opening tool to lift the front camera press-fit connector free.

Add Comment

Insert one of the plastic opening tools into any side of the main circuit board and gently pry it loose from the front cover. Repeat the process all around the circuit board.
  • Insert one of the plastic opening tools into any side of the main circuit board and gently pry it loose from the front cover. Repeat the process all around the circuit board.

Add Comment

Detach the main circuit board from the front cover.
  • Detach the main circuit board from the front cover.

Add Comment

Gently pry off the digitizer from the main circuit board using a spudger
  • Gently pry off the digitizer from the main circuit board using a spudger

Add Comment

Carefully separate the digitizer from circuit board. Using your hands, gently remove the ribbon connecting the digitizer to the circuit board. Using your hands, gently remove the ribbon connecting the digitizer to the circuit board.
  • Carefully separate the digitizer from circuit board.

  • Using your hands, gently remove the ribbon connecting the digitizer to the circuit board.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Akira Nakaza

Member since: 11/08/2017

341 Reputation

3 Guides authored

Team

IUPUI, Team S5-G5, Baechle Fall 2017 Member of IUPUI, Team S5-G5, Baechle Fall 2017

IUPUI-BAECHLE-F17S5G5

3 Members

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 2

Past 30 Days: 23

All Time: 185