Introduction

The bundled cable connector is the electronic link between the motherboard and the monitor screen.

Place the monitor screen face down.
  • Place the monitor screen face down.

  • Firmly hold the base of the stand with one hand and the bottom of the monitor with the other hand.

  • Pull the stand away from the monitor.

Add Comment

Use the plastic opening tool to pry the back panel from the front panel.
  • Use the plastic opening tool to pry the back panel from the front panel.

  • Start at one point of the crease and pry along the entire monitor for the best results.

Add Comment

  • Gently lift the back panel away from the monitor.

Add Comment

  • Be sure to keep track of where you place your screws. A magnetic mat is great for keeping your screws in one spot.

  • Unscrew the four 7.5 mm Phillips #2 screws connecting the motherboard to the metal casing.

Add Comment

  • Remove the four 10 mm hex screws.

Add Comment

  • Gently lift the motherboard casing from the monitor.

Add Comment

  • Pull the bundled cable connector gently away from motherboard.

Add Comment

  • Grasp the other side of the bundled cable connector and gently pull the connector away from the screen.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Jeffrey Kong

Member since: 09/22/2014

707 Reputation

5 Guides authored

Team

Cal Poly, Team 12-3, Forte Fall 2014 Member of Cal Poly, Team 12-3, Forte Fall 2014

CPSU-FORTE-F14S12G3

5 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 28

All Time: 1,352