Introduction

Sometimes an unlabeled, broken, or missing key on your device can be replaced with new a key. This guide shows you how to replace a key with one from a manufacturer or similar device.

Parts

No parts required.

  1. Make sure device is powered off and disconnected from any power supply.
    • Make sure device is powered off and disconnected from any power supply.

    • Disconnect the tablet screen from the magnetic hinge where the keyboard is attached.

    • Pry off the damaged key by using the nylon spudger to gently push the key upwards.

    Add Comment

  2. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. If the white plastic horizontal spring becomes misaligned, re-align and pop the two hinges back into place with the tweezers or your fingers.
    • If the white plastic horizontal spring becomes misaligned, re-align and pop the two hinges back into place with the tweezers or your fingers.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Shannon Griffin

Member since: 10/03/2016

940 Reputation

5 Guides authored

Team

USF Tampa, Team 1-3, Sullivan Fall 2016 Member of USF Tampa, Team 1-3, Sullivan Fall 2016

USFT-SULLIVAN-F16S1G3

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 7

Past 7 Days: 25

Past 30 Days: 155

All Time: 4,041