Skip to main content

Acer Nitro 5 AN515-55-55M1 Fan Replacement

What you need

  1. Acer Nitro 5 AN515-55-55M1 Fan Replacement, Bottom Cover: step 1, image 1 of 1
    • Make sure the device is off and unplugged from power.

    • Flip the device so the bottom is facing up.

    • Remove 11 screws from the bottom case using a Phillips #1 screwdriver.

  2. Acer Nitro 5 AN515-55-55M1 Fan Replacement: step 2, image 1 of 2 Acer Nitro 5 AN515-55-55M1 Fan Replacement: step 2, image 2 of 2
    • Lift the top left and right corners up and away from the device.

    • This may require some force and will make harsh clicking sounds. This is normal; it's the plastic tabs separating from each other.

    • Remove the panel from the laptop.

  3. Acer Nitro 5 AN515-55-55M1 Fan Replacement, Battery: step 3, image 1 of 3 Acer Nitro 5 AN515-55-55M1 Fan Replacement, Battery: step 3, image 2 of 3 Acer Nitro 5 AN515-55-55M1 Fan Replacement, Battery: step 3, image 3 of 3
    • Use an opening tool to disconnect the battery from the motherboard.

  4. Acer Nitro 5 AN515-55-55M1 Fan Replacement: step 4, image 1 of 2 Acer Nitro 5 AN515-55-55M1 Fan Replacement: step 4, image 2 of 2
    • Remove the two screws from the battery with a Phillips #1 screwdriver.

    • Remove the battery by pulling up and out from the left side.

  5. Acer Nitro 5 AN515-55-55M1 Fan Replacement, Motherboard: step 5, image 1 of 3 Acer Nitro 5 AN515-55-55M1 Fan Replacement, Motherboard: step 5, image 2 of 3 Acer Nitro 5 AN515-55-55M1 Fan Replacement, Motherboard: step 5, image 3 of 3
    • Disconnect the seven cables from the motherboard using an iFixit opening tool.

  6. Acer Nitro 5 AN515-55-55M1 Fan Replacement: step 6, image 1 of 3 Acer Nitro 5 AN515-55-55M1 Fan Replacement: step 6, image 2 of 3 Acer Nitro 5 AN515-55-55M1 Fan Replacement: step 6, image 3 of 3
    • Use an iFixit opening tool to lift the two Wi-Fi antenna cables up and away from the Wi-Fi card.

  7. Acer Nitro 5 AN515-55-55M1 Fan Replacement: step 7, image 1 of 3 Acer Nitro 5 AN515-55-55M1 Fan Replacement: step 7, image 2 of 3 Acer Nitro 5 AN515-55-55M1 Fan Replacement: step 7, image 3 of 3
    • Remove the six screws surrounding the fan using a Phillips #1 screwdriver.

    • Remove the two shorter screws from the motherboard using a Phillips #1 screwdriver.

    • Lift the taped wires off of the fans on the right and left sides.

  8. Acer Nitro 5 AN515-55-55M1 Fan Replacement: step 8, image 1 of 3 Acer Nitro 5 AN515-55-55M1 Fan Replacement: step 8, image 2 of 3 Acer Nitro 5 AN515-55-55M1 Fan Replacement: step 8, image 3 of 3
    • Lift up the right side of the motherboard.

    • The cables may need some guidance to leave the management holes on the motherboard.

    • Continue to lift at an angle until there is a give.

    • Remove the motherboard and fans from the laptop.

  9. Acer Nitro 5 AN515-55-55M1 Fan Replacement, Fan: step 9, image 1 of 3 Acer Nitro 5 AN515-55-55M1 Fan Replacement, Fan: step 9, image 2 of 3 Acer Nitro 5 AN515-55-55M1 Fan Replacement, Fan: step 9, image 3 of 3
    • Unplug the two fan connectors from each side of the motherboard using an opening tool.

  10. Acer Nitro 5 AN515-55-55M1 Fan Replacement: step 10, image 1 of 2 Acer Nitro 5 AN515-55-55M1 Fan Replacement: step 10, image 2 of 2
    • Both fans are loose at this point and are only being held in by thermal tape.

    • Lift both fans up on each side and fold over the heat pipe.

  11. Acer Nitro 5 AN515-55-55M1 Fan Replacement: step 11, image 1 of 2 Acer Nitro 5 AN515-55-55M1 Fan Replacement: step 11, image 2 of 2
    • Pull the fan away from the heat pipe on both sides of the motherboard.

    • The tape will separate off of the heat pipe.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Samuel Rouillard

Member since: 03/30/21

674 Reputation

5 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 6

Past 30 Days: 45

All Time: 1,160