Introduction

This guide has step-by-step information for replacing an Acer Iconia tablet A100 screen's cover glass. The guide provides necessary tools for the replacement of the tablet. If anyone is inquiring on how to fix a screen,this is the place to go.

Parts

No parts required.

Begin with the screen facing in the upward position.
  • Begin with the screen facing in the upward position.

Add Comment

Remove the four side pieces of the tablet.
  • Remove the four side pieces of the tablet.

  • Start with either side and work your way around the tablet.

Add Comment

Separate the screen from the device with a plastic opening tool (four sides in total). Start with a plastic opening tool along the top perimeter of the tablet, the thin line, and remove the screen. Start with a plastic opening tool along the top perimeter of the tablet, the thin line, and remove the screen.
  • Separate the screen from the device with a plastic opening tool (four sides in total).

  • Start with a plastic opening tool along the top perimeter of the tablet, the thin line, and remove the screen.

Add Comment

Grab the new screen, and place on top of the tablet.
  • Grab the new screen, and place on top of the tablet.

  • Position it to where everything is aligned correctly.

Add Comment

Put the four side pieces back in its original place.
  • Put the four side pieces back in its original place.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Omar Acosta

Member since: 03/03/2015

490 Reputation

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 22

All Time: 844