Introduction

This will show a step by step guide of how to replace the rear camera in your Acer Iconia One 8 B1-850 tablet.

The first step to replacing the rear camera on your Acer tablet is to remove the Back Panel. To do that, use your iFixit opening tool to pry open the device in the small crevice. Do this gently in order not to crack the screen on your tablet. The first step to replacing the rear camera on your Acer tablet is to remove the Back Panel. To do that, use your iFixit opening tool to pry open the device in the small crevice. Do this gently in order not to crack the screen on your tablet.
  • The first step to replacing the rear camera on your Acer tablet is to remove the Back Panel. To do that, use your iFixit opening tool to pry open the device in the small crevice. Do this gently in order not to crack the screen on your tablet.

Add Comment

Deck the Halls
With tools and Fix Kits
To remove the ZIF connector on the rear camera, gently use the flat end of your spudger to lift it up and free the rear camera.
  • To remove the ZIF connector on the rear camera, gently use the flat end of your spudger to lift it up and free the rear camera.

Add Comment

In order to gently remove the camera, grab the precision tweezers and carefully pull out the connector to remove the camera.
  • In order to gently remove the camera, grab the precision tweezers and carefully pull out the connector to remove the camera.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Josh Cooper

Member since: 04/13/2017

319 Reputation

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 13

All Time: 70