Introduction

Replace the battery in an Acer Iconia A1-810 to maintain high performance and charge duration.

Parts

No parts required.

Remove the back cover by lifting with a plastic opening tool, below the camera button slot.
  • Remove the back cover by lifting with a plastic opening tool, below the camera button slot.

I found my thumbnail worked better, and starting near one of the corners. The picture shows the tool inserted where it could easily damage the SD card mechanism.

James Dellar - Reply

Remove the black tape connecting the battery to the motherboard.
  • Remove the black tape connecting the battery to the motherboard.

Add Comment

Pinch the sides of the white resistor to safely remove it without damaging it or yourself.
  • Pinch the sides of the white resistor to safely remove it without damaging it or yourself.

This is a white connector, and it is easy to get fingernails to both ends to pull it out of the metal socket.

James Dellar - Reply

Remove battery from adhesive. Remove battery from adhesive.
  • Remove battery from adhesive.

There is a clear plastic tab to pull (being used in the photo), which lifts the battery in one, and unsticks it from the 2 or 3 sticky pads.

James Dellar - Reply

Conclusion

To reassemble your device, follow these instructions in reverse order.

4 other people completed this guide.

John

Member since: 01/29/2015

402 Reputation

3 Guides authored

Team

UWT Liner: Group 3 Member of UWT Liner: Group 3

Community

5 Members

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 9

Past 7 Days: 57

Past 30 Days: 305

All Time: 9,169