Introduction

Use this guide to replace a key from the keyboard of your device.

Parts

No parts required.

Make sure you turn off the laptop before starting. Place the flat head screw driver under the key, but over the key clip retainer.
  • Make sure you turn off the laptop before starting.

  • Place the flat head screw driver under the key, but over the key clip retainer.

Add Comment

Push down on one of the bottom corners of the key, so that the opposite diagonal corner rises and gives leeway.
  • Push down on one of the bottom corners of the key, so that the opposite diagonal corner rises and gives leeway.

  • Carefully place the flat head screw driver under the raised corner.

  • Carefully pry up from underneath the raised corner to raise the metal clips away from the key base.

Add Comment

Pry up from the top left and right corners of the retainer subsequently. Remove clip retainer.
  • Pry up from the top left and right corners of the retainer subsequently.

  • Remove clip retainer.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Johnathan

Member since: 09/26/2017

201 Reputation

2 Guides authored

Team

USF Tampa, Team S11-G1, Passmore Fall 2017 Member of USF Tampa, Team S11-G1, Passmore Fall 2017

USFT-PASSMORE-F17S11G1

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 15

All Time: 65