Skip to main content

Introduction

This guide will take a user through the replacement of the hard of drive.

Parts

No parts specified.

  1. Remove the storage tray on the left edge of the device.
    • Remove the storage tray on the left edge of the device.

  2. Use a Phillips #0 screwdriver to remove seventeen 7mm screws from the lower case.
    • Use a Phillips #0 screwdriver to remove seventeen 7mm screws from the lower case.

  3. Lift up the back case to remove it.
    • Lift up the back case to remove it.

  4. First locate the the hard drive as outlined Pull the black bundle cable from its slot by its purple tab Finally, lift and remove the hard drive
    • First locate the the hard drive as outlined

    • Pull the black bundle cable from its slot by its purple tab

    • Finally, lift and remove the hard drive

Conclusion

To reassemble your device, follow these instructions in reverse order.

Anthony hough

Member since: 09/20/2017

101 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 8

All Time: 293