Introduction

The battery is the power source for the device. A damaged or faulty battery will cause the device to not power on. If you have followed all the steps in the Troubleshooting Guide and found that you have a damaged or faulty battery, this step-by-step guide will lead you through the process of removing and replacing the battery.

Ensure the device is powered off by holding down the power button on the top left-hand side.
  • Ensure the device is powered off by holding down the power button on the top left-hand side.

  • On a flat, level surface, flip the device over so that the back-plate is accessible.

Add Comment

Using a spudger or any fine-pointed tool, push the release slide away from the center of the device. Simultaneously pull the battery out and away from the device. Simultaneously pull the battery out and away from the device.
  • Using a spudger or any fine-pointed tool, push the release slide away from the center of the device.

  • Simultaneously pull the battery out and away from the device.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Jose Souto

Member since: 02/15/2017

334 Reputation

3 Guides authored

Team

USF Tampa, Team 8-3, Eyestone Spring 2017 Member of USF Tampa, Team 8-3, Eyestone Spring 2017

USFT-EYESTONE-S17S8G3

4 Members

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 9

All Time: 182