Introduction

When removing the screen border, make sure to take caution to not damage the screen itself. When removing the screws from the screen, ensure you have a safe space to put the screws as they are very small and easy to lose.

Parts

No parts required.

Open the laptop screen to the farthest back position Using the plastic opening tool, pry off the screen border and completely remove it. Using the plastic opening tool, pry off the screen border and completely remove it.
  • Open the laptop screen to the farthest back position

  • Using the plastic opening tool, pry off the screen border and completely remove it.

•Using the JIS #1 screwdriver, remove the 4 3mmscrews from each corner of the screen •Using the JIS #1 screwdriver, remove the 4 3mmscrews from each corner of the screen
  • •Using the JIS #1 screwdriver, remove the 4 3mmscrews from each corner of the screen

New Battery = Faster iPhone
Fix Kits starting at $16.99
Remove the screen and turn it face down
  • Remove the screen and turn it face down

Carefully pull back the tape on the connector until the connector is fully revealed Carefully pull back the tape on the connector until the connector is fully revealed
  • Carefully pull back the tape on the connector until the connector is fully revealed

Carefully remove the connector from the old screen and connect it to your new, compatible screen
  • Carefully remove the connector from the old screen and connect it to your new, compatible screen

Conclusion

To reassemble your device, follow these instructions in reverse order starting from Step 3.

Timothy Carney

Member since: 09/25/2017

104 Reputation

1 Guide authored

Team

USF Tampa, Team S3-G1, Cannon Fall 2017 Member of USF Tampa, Team S3-G1, Cannon Fall 2017

USFT-CANNON-F17S3G1

4 Members

6 Guides authored

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 10

All Time: 28