Introduction

This manual will help you if you want to change or uprade your SATA HDD to SSD or DDR3 RAM Module or if you want to replace your not working WiFi card.

When you doing this, do not rush !!!


Please SUBSCRIBE to my channel ツ

Video Overview

Image 1/2: Unscrew 2x screws M 2.5x8.0 Image 2/2: Unscrew 2x screws M 2.5x8.0
  • Remove the battery.

  • Unscrew 2x screws M 2.5x8.0

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • With a plastic tool remove the Memory RAM / Hard Drive / Wifi Cover Door

Add Comment

Image 1/3: Unscrew 4x screws to remove the disk from the HDD Caddy Holder. Image 2/3: Unscrew 4x screws to remove the disk from the HDD Caddy Holder. Image 3/3: Unscrew 4x screws to remove the disk from the HDD Caddy Holder.
  • Drag the SATA HDD to release it.

  • Unscrew 4x screws to remove the disk from the HDD Caddy Holder.

Add Comment

Image 1/3: The RAM memory modules have a key notch position to prevent putting the board incorrectly. Image 2/3: The RAM memory modules have a key notch position to prevent putting the board incorrectly. Image 3/3: The RAM memory modules have a key notch position to prevent putting the board incorrectly.
  • Use plastic tool to release the DDR3 RAM memory module from the locking clips.

  • The RAM memory modules have a key notch position to prevent putting the board incorrectly.

Add Comment

Image 1/3: '''Did you do it successfully?''' Image 2/3: . Image 3/3: '''[https://www.youtube.com/subscription_center?add_user=MrZServices|Please SUBSCRIBE to my channel  ツ]'''

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

4 other people completed this guide.

ZFix

Member since: 12/09/2013

129,457 Reputation

366 Guides authored

Team

Master Techs Member of Master Techs

Community

264 Members

614 Guides authored

One Comment

i want to replace hhd to ssd can you please tell me

hmtalha - Reply

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 44

Past 30 Days: 175

All Time: 11,611