Parts

No parts required.

  1. To release the battery, depress the battery release with a nylon spudger. Hold the latch down and slide it over.
    • To release the battery, depress the battery release with a nylon spudger. Hold the latch down and slide it over.

    Add Comment

  2. Firmly grab hold of the battery and slide it out of the laptop.
    • Firmly grab hold of the battery and slide it out of the laptop.

    Add Comment

    • Remove the M2.5x8 screw with a PH1 screwdriver.

    Add Comment

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Use the plastic opening tool to pop off the small back cover.

    Add Comment

    • Use a PH0 Phillips screwdriver to remove the screw securing the hard drive.

    Add Comment

    • Use a nylon spudger to slightly pry up the hard drive near the screw holes.

    Add Comment

    • Grab hold of the plastic tab and pull the hard drive away from the connectors. This will release the hard drive.

    • The hard drive connector is fragile. Handle with care.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

Caleb lindsay

Member since: 04/11/2016

730 Reputation

6 Guides authored

Team

Cal Poly, Team 34-15, Maness Spring 2016 Member of Cal Poly, Team 34-15, Maness Spring 2016

CPSU-MANESS-S16S34G15

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 9

Past 30 Days: 40

All Time: 1,270