Introduction

This repair guide will provide you with a step-by-step process on how to replace the LCD on your Acer aspire 5334-2581 device.

Parts

No parts required.

Please make sure your device is unplugged . Turn it over slowly, and place it on a flat surface.
  • Please make sure your device is unplugged . Turn it over slowly, and place it on a flat surface.

Add Comment

This latch holds your battery in place, it should always be locked. Make sure to unlock this piece.
  • This latch holds your battery in place, it should always be locked. Make sure to unlock this piece.

  • Do not break this latch, otherwise your battery will not hold in place.

Add Comment

Locate the eject latch and push it so the battery can come out.
  • Locate the eject latch and push it so the battery can come out.

  • The battery will lift up once you have pushed the latch.

  • You DO NOT need to adjust the latch when replacing the new battery, because it just snaps in place.

Add Comment

Lift the battery up, and it should just come right off.  You should see the label with the part number.
  • Lift the battery up, and it should just come right off. You should see the label with the part number.

Add Comment

Remove the 4 rubber supports from the screen. Then remove the screws underneath.
  • Remove the 4 rubber supports from the screen. Then remove the screws underneath.

Add Comment

With a spudger, release the clips that hold the plastic frame to the back cover.
  • With a spudger, release the clips that hold the plastic frame to the back cover.

  • Be careful while handling the bottom, there are cable connections, and you don't want to damage them

Add Comment

With caution disconnect the camera cable.
  • With caution disconnect the camera cable.

Add Comment

Remove the 4 screws in the side of the LCD. Screen should be able to come of the frame Remove the 4 screws in the side of the LCD. Screen should be able to come of the frame
  • Remove the 4 screws in the side of the LCD. Screen should be able to come of the frame

Add Comment

Take the screen and flip on top of the keyboard.
  • Take the screen and flip on top of the keyboard.

  • Unplug the cable connected to the video card.

  • Don't use too much force, you don't want to damage this component.

Add Comment

Remove the tape, and unplug the display cable. Unstick  the cable from the back of the LCD, and now the LCD is free to come off.  You are ready to install a new one
  • Remove the tape, and unplug the display cable.

  • Unstick the cable from the back of the LCD, and now the LCD is free to come off. You are ready to install a new one

  • Try not to damage this cable, otherwise replacing it would be so much pain.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

gilson teixeira

Member since: 10/20/2016

208 Reputation

5 Guides authored

Team

UMass Dartmouth, Team 1-2, Catania Fall 2016 Member of UMass Dartmouth, Team 1-2, Catania Fall 2016

UMASSD-CATANIA-F16S1G2

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 7

All Time: 100