Introduction

To replace a faulty or a cracked screen, follow these directions.

  1. Unlock the battery by pushing and holding the lock button.
    • Unlock the battery by pushing and holding the lock button.

  2. While holding the lock button, pull out the battery The battery is now ready to be replaced with a new one
    • While holding the lock button, pull out the battery

    • The battery is now ready to be replaced with a new one

  3. Locate and remove the  four (4) pads using Angled Tweezers Locate and remove the  four (4) pads using Angled Tweezers
    • Locate and remove the four (4) pads using Angled Tweezers

  4. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  5. Remove the four screws that were under the pads Remove the four screws that were under the pads
    • Remove the four screws that were under the pads

  6. Carefully pull the bevel (frame) off of the screen Carefully pull the bevel (frame) off of the screen Carefully pull the bevel (frame) off of the screen
    • Carefully pull the bevel (frame) off of the screen

  7. Locate the four screws that are holding the screen in place Remove the screws Remove the screws
    • Locate the four screws that are holding the screen in place

    • Remove the screws

  8. Pull the screen out gently Lay the screen down on the keyboard
    • Pull the screen out gently

    • Lay the screen down on the keyboard

  9. Locate the connector between the screen and the computer Remove any tape
    • Locate the connector between the screen and the computer

    • Remove any tape

  10. Gently pull the connector off of the screen
    • Gently pull the connector off of the screen

    • The screen can now be replaced with a new one

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 133