Introduction

This guide will show detailed steps to carefully disassemble the laptop, and replace the internal hard drive.

Parts

No parts required.

Lay the laptop upside down. Locate and unscrew the  seven phillips head screws.
  • Lay the laptop upside down.

  • Locate and unscrew the seven phillips head screws.

Add Comment

Remove the cover panel from the laptop
  • Remove the cover panel from the laptop

Add Comment

Remove the hard drive from the laptop by using a Spudger tool to pry it out. Remove the hard drive from the laptop by using a Spudger tool to pry it out. Remove the hard drive from the laptop by using a Spudger tool to pry it out.
  • Remove the hard drive from the laptop by using a Spudger tool to pry it out.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 4

All Time: 60