Accusplit Pro Survivor A601X Battery Replacement

Introduction

Use this guide to replace the battery on an Accusplit Pro Survivor A601X stopwatch.

As is the case in any electronical device, the battery will either die or become corroded after a long time. If you notice your stopwatch has stopped working, the battery likely needs replacement. This guide will demonstrate how to access and replace the battery without damaging the rest of the watch.

What you need

Step 1 Battery

Accusplit Pro Survivor A601X Battery Replacement, Battery: step 1, image 1 of 1

Unscrew the back of the watch with a Phillip’s head #0, 2.5 millimeter screwdriver.
Set the screws to the side. You will need them to reassemble the watch.

Edit

Step 2

Remove the back of the watch.

Edit

Step 3

Accusplit Pro Survivor A601X Battery Replacement: step 3, image 3 of 3

Remove the motherboard holding the battery.

Edit

Step 4

Accusplit Pro Survivor A601X Battery Replacement: step 4, image 3 of 3

Remove the black frame and the gray rubber piece that is surrounding the battery.

Edit

Step 5

Pull back the metal latch that is holding the battery.
Do not bend or distort the latch. The latch enables the electric current to run through the device from the battery.

Edit

Step 6

Accusplit Pro Survivor A601X Battery Replacement: step 6, image 3 of 3

Remove the battery while still pulling the latch.

Edit

Step 7

Place the new Maxell CR2032 3v battery into the motherboard with the positive side up or facing you.
Ensure that the latch is touching the positive side of the battery once it is placed inside.

Edit