1. Identify the battery locker.
    • Identify the battery locker.

      • Set the righthand locker to unlock.

    • Pull the battery while setting the lefthand locker to unlock.

    Add Comment

  2. Remove the battery.
    • Remove the battery.

    Add Comment

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Identify these:

      • 4 keyboard clipper

    • Remove the keyboard clipper by gently twisting them till pops out.

    • Lift the keyboard up by pivoting on the bottom side.

      • Don't lift it too high up, because beneath it there's the keyboard ZIF connector still connected; refer to the next step.

    Add Comment

    • Identify this:

      • The ZIF connector locker

    • Gently pull the locker out.

      • Use a pair of tweezers to make it easier to pull it out.

      • Don't forget the other side too!

    • Remove the ZIF connector.

    • Remove the keyboard.

    Add Comment

    • Remove the following screw:

      • 1 long Philips #0 screw

    • Remove the hard drive holder.

    • Pull the plastic tab away from the socket.

    • Remove the Hard Drive.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cakra Diaz

Member since: 07/26/2017

838 Reputation

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 9

All Time: 89