Introduction

To get to many components in the phone, one must remove the back panel. This guide will serve as a first step in replacing most of the components.

Parts

No parts required.

Image 1/3: Image 2/3: Image 3/3:
  • Remove five 9.5 mm Phillips #1 screws from the back panel of the phone.

Add Comment

Image 1/3: Be careful not to break the clips holding the Back Panel to the Front Panel Image 2/3: Be careful not to break the clips holding the Back Panel to the Front Panel Image 3/3: Be careful not to break the clips holding the Back Panel to the Front Panel
  • Slide metal spudger into the crack around the Front Panel of the phone

  • Be careful not to break the clips holding the Back Panel to the Front Panel

Add Comment

Image 1/1:
  • When setting the back panel down, be careful to not rip any of the wires off of the internal components

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Charles Messmore

Member since: 02/15/2016

513 Reputation

5 Guides authored

Team

IUPUI, Team 1-1, Harley Spring 2016 Member of IUPUI, Team 1-1, Harley Spring 2016

IUPUI-HARLEY-S16S1G1

4 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 6

All Time: 104