Parts

No parts required.

Introduction

This guide will inform you on how to replace your hard drive. This replacement will be very easy as there are only a few screws that need to be taken out during this guide to access and remove the hard drive.

Image 1/2: Unscrew the two 3mm Phillips screws using a PH0 screwdriver. Image 2/2: Lift the small black panel upward by putting your fingernail in the provided slot.
  • Turn the laptop over to the back.

  • Unscrew the two 3mm Phillips screws using a PH0 screwdriver.

  • Lift the small black panel upward by putting your fingernail in the provided slot.

Add Comment

Image 1/1:
  • Use the J1 screwdriver to unscrew the four 3mm Phillips screws on the hard drive.

Add Comment

Image 1/1:
  • Slowly pull the hard drive upward with your finger and thumb.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ashley DeHuff

Member since: 09/15/2016

828 Reputation

8 Guides authored

Team

CSU Fullerton, Team 1-3, Bruce Fall 2016 Member of CSU Fullerton, Team 1-3, Bruce Fall 2016

CSUF-BRUCE-F16S1G3

4 Members

9 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 8

All Time: 173