AEG Electrolux Competence B33512 fan temperature switch replacement
Bjarne and one other contributor
Last updated on Jan 29, 2021
Views: 10K
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 43
- Past 30 Days:
- 183
- All Time:
- 10,281
Comments: 3
2 comments on steps, 1 guide comment.
Go to guide commentsCompleted: 3 4
3 people have marked this guide "completed." Will you be next?
4 people have marked this guide "completed." Including you — great job!
Favorites: 2 3
2 people have favorited (and subscribed to) this guide. Will you be next?
3 people have favorited (and subscribed to) this guide — including you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Introduction
Go to step 1 ↓I created this guide after successfully trying this with our oven which started turning itself off after overheating caused by inactivity of the top fan. It is working again like before now. The replacement part was about 20$ on eBay.
What you need
-
-
-
Remove both screws that are used to hold the oven in place
-
Cautiously pull out the oven and place it on a small table. Be prepared for medium weight and use the handles in the middle of the oven on both sides.
Ask FixBot
-
-
-
Remove the two screws,
-
now slide the top metal sheet to the rear end of the oven
-
until you are able to lift the front edge of it and remove it entirely.
-
-
-
Cautiously pull out the ends of both white cables
-
Also pull out the light blue ones
-
This is the switch, hidden in cables
-
-
-
Now put in the new switch and pay attention that it doesn't touch any metal surfaces that may get hot
-
-
-
To reassemble your device, follow these instructions in reverse order
Cancel: I did not complete this guide.
3 other people completed this guide.
Special thanks to these translators:
100%
Bjarne is helping us fix the world! Want to contribute?
Start translating ›
