3DR Solo Phone Holder Replacement
Francia and 3 other contributors
Last updated on Jun 13, 2019
Views: 757
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 17
- Past 30 Days:
- 95
- All Time:
- 757
Comments: 1
1 comment on steps.
Completed: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓This guide shows the steps for detaching the 3DR Solo's phone holder from the controller.
What you need
Tools
-
-
-
Take the controller and turn it so that the 3DR logo is facing you.
Ask FixBot
-
-
-
Using the PH0 Phillips head screwdriver, unscrew the two screws located above the 3DR logo.
-
-
-
Hold the controller with one hand, and the phone holder with the other hand. Pull the phone holder upward, away from the controller.
-
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
CSU Fullerton, Team S2-G3, Bruce Fall 2017 Member of CSU Fullerton, Team S2-G3, Bruce Fall 2017
CSUF-BRUCE-F17S2G3
4 Members
60 Guides authored
