Skip to main content

27.5 Hyper Viking Trail Hard Tail Pedals Replacement

What you need

  1. 27.5 Hyper Viking Trail Hard Tail Pedals Replacement, Bicycle Pedals: step 1, image 1 of 1
    • Park the bicycle on a flat surface, and support it using the kickstand (if available).

    • Prepare all tools and replacement pedals within reach.

  2. 27.5 Hyper Viking Trail Hard Tail Pedals Replacement: step 2, image 1 of 2 27.5 Hyper Viking Trail Hard Tail Pedals Replacement: step 2, image 2 of 2
    • Unscrew the bolt on the left side with the 7/16" wrench.

    • Unscrew the bolt on the right side with the 7/16" wrench. (Not shown on image)

  3. 27.5 Hyper Viking Trail Hard Tail Pedals Replacement: step 3, image 1 of 1
    • Remove old pedals on both sides.

  4. 27.5 Hyper Viking Trail Hard Tail Pedals Replacement: step 4, image 1 of 2 27.5 Hyper Viking Trail Hard Tail Pedals Replacement: step 4, image 2 of 2
    • Put on the new replacement pedal on the left side.

    • Tighten the bolt with 7/16" wrench.

    • Repeat on the right side. (Not shown on image)

  5. 27.5 Hyper Viking Trail Hard Tail Pedals Replacement: step 5, image 1 of 1
    • Tighten the bolts on both sides of the bike.

    • Check the bolts after riding for the first time.

Conclusion

In our guide, the original plastic bike pedals are replaced with stronger aluminum pedals that can withstand harsh riding conditions and inclement weather. Anyone can easily replace your bike pedals by following our guide.

Ningzhe Ya

Member since: 01/31/23

151 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 4

Past 30 Days: 11

All Time: 189