Introduction
The following is a guide how to replace the rear windshield wiper blade on a 2008-2010 Audi A3 Sportback. The wiper that is replaced is 13 inch standard conventional wiper blade. Over time, rubber will naturally breakdown after exposure to adverse weather. When this occurs, the windshield wiper produces unusual noises like skipping, screeching or smacking, so you need to replace your wiper blades . See the troubleshooting page for this device.
What you need
-
-
Lift the wiper arm away from the windshield.
-
Slightly pull the blade away from the wiper arm to disconnect it.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
University of Memphis, Team S4-G4, Kim Fall 2019 Member of University of Memphis, Team S4-G4, Kim Fall 2019
UM-KIM-F19S4G4
3 Members
5 Guides authored
