Fix Your Stuff Community Store

2004 Toyota 4Runner Rear Wiper Arm Replacement

Introduction

A broken rear wiper arm is a very common issue for the 2004 Toyota 4runners and can cost a lot of money when replaced by mechanics.

The rear wiper arm serves a purpose when it comes to driving safety and visibility.

An unfunctional rear wiper arm makes it tough for a driver to drive as they will not be able to see the vehicles coming behind them while driving due to precipitated weather.

Use this repair guide to replace the broken rear wiper arm on a 2004 Toyota 4runner for a low cost!

What you need

  1. 2004 Toyota 4Runner Rear Wiper Arm Replacement, Rear Wiper Arm: step 1, image 1 of 2 2004 Toyota 4Runner Rear Wiper Arm Replacement, Rear Wiper Arm: step 1, image 2 of 2

    • The plastic covering can be easily broken. Remove cautiously.

    • Remove the plastic covering that is hiding the screw.

    Edit

  2. 2004 Toyota 4Runner Rear Wiper Arm Replacement: step 2, image 1 of 1

    • Let the lubricant soak for a minimum of 5 minutes.

    • Spray/ drench the screw/ lug-nut using WD-40 to create an easy lug-nut removal.

    Edit

  3. 2004 Toyota 4Runner Rear Wiper Arm Replacement: step 3, image 1 of 1

    • Using a 10mm socket, remove the lug-nut.

    Edit

  5. 2004 Toyota 4Runner Rear Wiper Arm Replacement: step 4, image 1 of 1

    • If the wiper arm is hard to remove, use a flat-head screwdriver for support.

    • With the lug-nut removed, gently wiggle the arm out of the socket.

    Edit

  6. 2004 Toyota 4Runner Rear Wiper Arm Replacement: step 5, image 1 of 2 2004 Toyota 4Runner Rear Wiper Arm Replacement: step 5, image 2 of 2

    • Once the wiper arm is pulled off, clean the thread and nut to ensure that both are clear of debris.

    Edit

  7. 2004 Toyota 4Runner Rear Wiper Arm Replacement: step 6, image 1 of 1

    • Place new wiper arm in socket.

    Edit

  8. 2004 Toyota 4Runner Rear Wiper Arm Replacement: step 7, image 1 of 2 2004 Toyota 4Runner Rear Wiper Arm Replacement: step 7, image 2 of 2

    • Using the 10mm socket, tighten the nut in place.

    Edit

  9. 2004 Toyota 4Runner Rear Wiper Arm Replacement: step 8, image 1 of 1

    • Place plastic cover back on.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

One Comment

Hi, what if the nut rusted and broke off when trying to remove ? Thanks.

Steven Dermody - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

All Time: 1,045