2000-2003 Toyota Sienna Windshield Wiper Replacement (2000, 2001, 2002, 2003)

Introduction

Learning how to replace a windshield wiper is essential to car ownership. Damaged wipers lead to impeded visibility due to streaking or not being able to clear the windshield. Driving with damaged wipers is dangerous and car owners should make sure to replace their blades every spring or fall. This guide explains how to replace the front windshield wipers on a 2000-2003 Toyota Sienna, and includes pictures and detailed instructions for the entire process.

What you need

Step 1 Windshield Wiper

2000-2003 Toyota Sienna Windshield Wiper Replacement, Windshield Wiper: step 1, image 1 of 1

Lift the windshield wiper to a 90-degree angle above the windshield.

Edit

Step 2

2000-2003 Toyota Sienna Windshield Wiper Replacement: step 2, image 3 of 3

Tilt the wiper upwards.
Pull the wiper blade down to release it from the j-hook.
Different brands of wipers use different unlatching mechanisms; these vary from pinching and pulling to pushing a button.

Edit

Step 3

Lay the arm back down onto the windshield.
Place the arm gently back down to avoid any damage.

Edit

Step 4

Remove the plastic protection from the rubber side of the new wiper blades.

Edit

Step 5

Lift the wiper arm back up and latch the j-hook around the mounting point of the new blade.

Edit

Step 6

2000-2003 Toyota Sienna Windshield Wiper Replacement: step 6, image 3 of 3

Gently lay the wipers back down onto windshield.

Edit

Step 7

2000-2003 Toyota Sienna Windshield Wiper Replacement: step 7, image 3 of 3

Start your vehicle.
Turn on the windshield wipers to ensure they are functioning properly.
Do not turn the engine on in a closed space to prevent carbon monoxide poisoning.