Introduction

This guide will show the steps of replacing a radio in a 1999 GMC Sierra SLE. The radio that is being replaced is a stock radio, and the new radio is a XO Vision XD107BT.

Since you'll be handling electrical cords during this installation, we recommend unplugging the car battery before proceeding with the replacement.

Tools

No tools required.

Use the gear shift to shift the truck from 'Park' to '1st Gear' so that the dash face is easily accessible. Pop the dash face off, and place it to the side until the radio has been replaced Pop the dash face off, and place it to the side until the radio has been replaced
  • Use the gear shift to shift the truck from 'Park' to '1st Gear' so that the dash face is easily accessible.

  • Pop the dash face off, and place it to the side until the radio has been replaced

Add Comment

Remove the radio from its place. Remove the bundled cable connector from the back of the radio unit. Remove the antenna plug from the back of the radio unit.
  • Remove the radio from its place.

  • Remove the bundled cable connector from the back of the radio unit.

  • Remove the antenna plug from the back of the radio unit.

Add Comment

Attach the radio plug to the back of the new radio. Also, attach the antenna chord to the back of the new radio. Also, attach the antenna chord to the back of the new radio.
  • Attach the radio plug to the back of the new radio.

  • Also, attach the antenna chord to the back of the new radio.

Add Comment

Align the slots along the sides of the new radio with the ones in the dash. Push new radio in until you hear a 'pop' sound, telling you the new radio is in place. Press the power button on new radio to insure that it works properly.
  • Align the slots along the sides of the new radio with the ones in the dash.

  • Push new radio in until you hear a 'pop' sound, telling you the new radio is in place.

  • Press the power button on new radio to insure that it works properly.

Add Comment

Replace dash face! Then you are finished! Replace dash face! Then you are finished!
  • Replace dash face! Then you are finished!

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Blake Moss

Member since: 06/01/2017

101 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 9

All Time: 64