What you need
-
-
Remove the six Phillips head screws
-
4X red: M2.5 x 7MM
-
2X Yellow: M2.5 x 7MM (Captive)
-
-
-
-
Using a spudger (with the assistance of the captive screws) gently pop any tabs on the front of the chassis. Now this doesn't come off quite like a 2018 Macbook Pro would, but once you pull the front up about an inch, it should slide forward pretty easily.
-
Almost done!
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
