Angle Grinder
100 mm (4') MODEL 9560CV 100 mm (4') MODEL 9563CV 115 mm (4-1/2') MODEL 9561CV
115 mm (4-1/2') MODEL 9564CV 125 mm (5') MODEL 9565CV
I N S T R U C T I O N M A N U A L
WARNING:
For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
www.makitatools.com
SPECIFICATIONS
| Model | 9560CV | 9563CV | 9561CV | 9564CV | 9565CV |
|---|---|---|---|---|---|
| No load speed (RPM) | 2,800-10,500/ min | 2,800-10,500/ min | 2,800-10,500/ min | 2,800-10,500/ min | 2,800-10,500/ min |
| Overall length | 289 mm (11-3/8') | 289 mm (11-3/8') | 299 mm (11-3/4') | 299 mm (11-3/4') | 299 mm (11-3/4') |
| Net weight | 1.7 kg (3.7 lbs) | 1.7 kg (3.7 lbs) | 1.8 kg (4.0 lbs) | 1.8 kg (4.0 lbs) | 1.8 kg (4.0 lbs) |
| Spindle thread | M10 x 1.25 | M10 x 1.25 | 5/8' | 5/8' | 5/8' |
Table Caption: This table compares the specifications of five different models: 9560CV, 9563CV, 9561CV, 9564CV, and 9565CV. All models share the same no-load speed, but differ in overall length, net weight, and spindle thread size.
- Manufacturer reserves the right to change specifications without notice.
- Specifications may differ from country to country.
GENERAL SAFETY RULES
(For All Tools)
WARNING:
Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
Work Area
Electrical Safety
- Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
- Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
- Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control.
- Double insulated tools are equipped with a polarized plug (one blade is wider than the other.) This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way. Double insulation eliminates the need for the three wire grounded power cord and grounded power supply system.
USA002-2
- Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded.
- Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
- Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.
- When operating a power tool outside, use an outdoor extension cord marked 'W-A' or 'W'. These cords are rated for outdoor use and reduce the risk of electric shock.
