JBL Pulse 4 SN Starting From GG

Table Caption: This table indicates that "UBL" is a designation for a "Service Manual".

PULSE 4 (S/N starting from GG)

SKU: JBLPULSE4BLK 、 JBLPULSE4WHT 、 JBLPULSE4BLKAM 、 JBLPULSE4WHTAM 、

CONTENTS

Table Caption: This table outlines the organization of a technical manual, listing various sections and their corresponding page numbers, including technical specifications, safety information, diagrams, and parts lists. It provides a clear overview of the document's content and structure.

Table Caption: This table indicates that the document was released by Global Quality, specifically harman/kardon, Inc., with version 1.0 in July 2019.

TECHNICAL SPECIFICATIONS

• Model Name: JBLPULSE4
• Bluetooth version: 4.2
• Support: A2DP V1.3, AVRCP V1.6
• Transducer: 2.25 inch
• Rated power: 20 W RMS
• Frequency response: 70 Hz - 20 kHz
• Signal-to-noise ratio: >80 dB
• Battery type: Lithium-ion polymer 26 WH (Equivalent to
• 3.6 V, 7260 mAh)
• Battery charge time: 3.5 hours (5 V / 3 A)
• Music playtime: up to 12 hours (varies by brightness &
• volume level and audio content)
• Bluetooth transmitter power: ≤ 10 dBm
• Bluetooth transmitter frequency range: 2.402 -2.480 GHz
• 2.4GHz SRD FREQUENCY RANGE: 2.407 -2.475 GHz
• Bluetooth transmitter modulation: GFSK, π /4-DQPSK, 8DPSK
• Dimension (W x D x H): 96 X 96 x 207 mm
• Weight: 1200 G

Important Safety Instructions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings.Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, or the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.
15. Do not expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the apparatus.
16. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle.
17. The mains plug of the power supply cord shall remain readily operable.
18. Do not expose batteries to excessive heat such as sunshine, fire or the like.

For Products That Transmit and Receive RF Energy:

FCC Regulations (USA Only)

FCC Information For Users

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) this device must accept any interference received, including interference that may cause undesired operation.

Radio and Television Interference

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and then on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Increase the separation between the equipment and receiver.
• Connect the equipment to a different outlet so that the equipment and receiver are on different branch circuits.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: Changes or modifications not expressly approved by Harman could void the user's authority to operate the equipment.

IC Statement and Warning (Canada Only)

This Class B digital apparatus complies with Canadian ICES003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

For Canadian Model

This Class B digital apparatus complies with Canadian ICES-003.

Modèle pour les Canadien

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

For Products with Radio Receivers That Can Use an External Antenna:

CATV or Antenna Grounding

If an outside antenna or cable system is connected to this product, be certain that it is grounded so as to provide some