Operator's manual

Vibratory rammer

BS

50, 60, 70

Model

BS

Document

5100041492

Issue

09.2017

Version

04

Language

en

Copyright © 2017 Wacker Neuson Produktion GmbH & Co. KG

Printed in Germany

All rights are reserved, in particular the worldwide applicable copyright, right of duplication and right of distribution.

This document may only be used by the recipient for the intended purpose. The document may not be reproduced entirely or partially, or translated into any other language.

Reproduction or translation, even extracts thereof, only with written approval of Wacker Neuson Produktion GmbH & Co. KG.

Any breach of the statutory provisions, in particular the protection of copyright, will lead to civil and criminal prosecution.

Wacker Neuson Produktion GmbH & Co. KG is constantly working on the improvement of its products as part of the technical further development. Therefore, we reserve the right to make changes to the illustrations and descriptions in this documentation without incurring any obligation to make changes to machines already delivered.

Errors excepted.

The machine on the cover may have special equipment (options).

ISO 9001 Quality Management System

Manufacturer

Wacker Neuson Produktion GmbH & Co. KG

Wackerstraße 6

D-85084 Reichertshofen

www.wackerneuson.com

Tel.: +49 845 3340 3200

E-mail address: service-LE@wackerneuson.com

Original operator's manual

1 Preface ..... 5
2 Introduction ..... 6
2.1 Using the manual ..... 6
2.2 Storage location of the manual ..... 6
2.3 Accident prevention regulations ..... 6
2.4 More information ..... 6
2.5 Target group ..... 6
2.6 Explanation of symbols ..... 6
2.7 Wacker Neuson Contact partner ..... 7
2.8 Disclaimer ..... 7
2.9 Product identification of the machine ..... 7
3 Security ..... 8
3.1 Policy ..... 8
3.2 Proper use ..... 8
3.3 Use not in accordance with the intended purpose ..... 8
3.4 Structural changes ..... 8
3.5 Areas of responsibility of the operator ..... 9
3.6 Operator responsibilities ..... 9
3.7 Personnel qualification ..... 9
3.8 Residual dangers ..... 9
3.9 General safety instructions ..... 9
3.10 Specific safety instructions – Vibratory rammer BS ..... 10
3.11 General safety instructions – Combustion engines ..... 11
3.12 General safety instructions – Fuel, lubricants and coolants ..... 11
3.13 Maintenance ..... 11
3.14 Personal Protective Equipment ..... 11
3.15 Safety devices ..... 13
3.16 Behavior in dangerous situations ..... 13
4 Safety and information labels ..... 14
5 Setup and function ..... 17
5.1 Standard package ..... 17
5.2 Application areas ..... 17
5.3 Short description ..... 17
5.4 Versions ..... 17
6 Components and operator's controls ..... 18
7 Transport ..... 19
7.1 Preparing the machine ..... 19
8 Storage ..... 20
9 Operation and use ..... 21
9.1 Inspection before commissioning ..... 21
9.2 Notes about operation ..... 21
9.3 Commissioning ..... 22
9.4 Operation ..... 23
9.5 Decommissioning ..... 24
10 Maintenance ..... 25
10.1 Maintenance table ..... 26
10.2 Maintenance work ..... 26
11 Troubleshooting ..... 33
11.1 Fault table ..... 33

12 Accessories ..... 34
13 Technical data ..... 35
13.1 Noise and vibration information ..... 35
13.2 BS50-2 ..... 35
13.3 BS50-2plus ..... 36
13.4 BS60-2 / BS60-2plus ..... 37
13.5 BS70-2 / BS70-2plus ..... 38
13.6 Combustion engine two-cycle ..... 39
13.7 BS50-4 ..... 40
13.8 BS60-4 ..... 41
13.9 BS70-4 ..... 42
13.10 Combustion engine four-cycle ..... 43
14 Emission Control Systems Information and Warranty ..... 44
14.1 Emission Control System Background Information ..... 44
14.2 Limited Defect Warranty for Wacker Neuson Emission Control Systems ..... 44
EC Declaration of Conformity ..... 48
EC Declaration of Conformity ..... 49

1 Preface

This operator's manual contains important information and procedures for the safe, proper and economic operation of this Wacker Neuson machine. Carefully reading, understanding and observing is an aid to avoiding hazards, repair costs and downtime, and therefore to increasing the availability and service life of the machine.

This operator's manual is not a manual for extensive maintenance or repair work. Such work should be carried out by Wacker Neuson service or by technically trained personnel. The Wacker Neuson machine should be operated and maintained in accordance with this operator's manual. An improper operation or improper maintenance can pose dangers. Therefore, the operator's manual