Get answers from this document
We've read all 100 pages so you don't have to. Ask and get your answer now.
T16 Gen1 P16s Gen1 Hmm En
T16 Gen 1 / P16s Gen 1 Hardware Maintenance Manual
Fifth Edition (August 2023)
© Copyright Lenovo 2022, 2023.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration 'GSA' contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS35F-05925.
Contents
| About this manual |
|---|
Table Caption: Table Content 452261
| Hibernation mode . . . . . . . . . . . . 31 Symptom-to-FRU index . . . . . . . . . . . 31 Numeric error codes . . . . . . . . . . . 32 Error messages . . . . . . . . . . . . . 33 Beep errors. . . . . . . . . . . . . . . 33 No-beep symptoms . . . . . . . . . . . 35 LCD-related symptoms . . . . . . . . . . 35 Intermittent problems. . . . . . . . . . . 36 Undetermined problems . . . . . . . . . 36 Chapter 5. Special keys . . . . . . . . 37 |
|---|
| Chapter 6. Locations . . . . . . . . . 39 Locating computer controls and connectors . . . 39 |
| Front . . . . . . . . . . . . . . . . . 39 Left and right . . . . . . . . . . . . . . 40 Rear . . . . . . . . . . . . . . . . . 42 Bottom . . . . . . . . . . . . . . . . 43 |
| Locating FRUs and CRUs . . . . . . . . . . . 44 |
| Major FRUs and CRUs . . . . . . . . . . 45 LCD FRUs and CRUs. . . . . . . . . . . 48 |
| Miscellaneous parts . . . . . . . . . . . 50 Connector and cable guide . . . . . . . . 50 Looking up FRU information . . . . . . . . . . 53 |
| Chapter 7. FRU replacement |
| Service tool kit . . . . . . . . . . . . . . . 55 Screw notices . . . . . . . . . . . . . . . 55 Retaining serial numbers . . . . . . . . . . . 56 |
| notices . . . . . . . . . . . . . . . . . 55 |
| Restoring the serial number of the system unit . . . . . . . . . . . . . . . . . . Retaining the UUID. . . . . . . . . . . . |
| Reading or writing the ECA information . . . . |
| 56 57 57 |
| Chapter 8. Removing or replacing an |
| . . . . 59 |
Table Caption: This table of contents outlines chapters on troubleshooting, special keys, component locations, and FRU (Field Replaceable Unit) replacement, including detailed sections on error diagnosis and part identification. It covers specific areas like hibernation, various error types, and component locations from front to bottom, as well as FRU/CRU identification and replacement procedures.
| 1050 M.2 solid-state drive and M.2 solid-state |
|---|
| drive bracket (for AMD models only) . . . . . . . 66 1060 Wireless WANcard and wireless-WAN-card |
| 1070 I/O bracket . . . . . . . . . . . . . . 69 |
| 1080 Thermal fan assembly . . . . . . . . . . 70 |
| 1090 USB board cable and USB board. . . . . . 71 |
| 1110 Speaker assembly . . . . . . . . . . . 72 |
| 1120 Coin-cell battery . . . . . . . . . . . . 73 |
| 1130 Memory module (for Intel models only) . . . 74 |
| 1140 Trackpad and trackpad cable . . . . . . . 74 |
| 1150 NFC module and NFC module cable (for |
| selected models) . . . . . . . . . . . . . . 76 |
| 1160 Smart card reader, smart card reader cable |
| and dummy smart card reader (for selected |
| models) . . . . . . . . . . . . . . . . . . |
| 76 |
Table Caption: This table lists various computer components, their part numbers, and corresponding page numbers where more information can be found. Some items are noted as being specific to certain processor models (AMD or Intel) or for selected configurations.
Table Caption: This table lists various computer components with corresponding part numbers and page references, likely from a service manual or parts catalog.
About this manual
This manual contains service and reference information for the following ThinkPad ® products:
Product name
Machine type(s)
ThinkPad T16 Gen 1
21BW, 21BV, 21CH, and 21CJ
ThinkPad P16s Gen 1
21BU, 21BT, 21CK, and 21CL
ThinkPad T16 Gen 1 and ThinkPad P16s Gen 1 might be shipped with different microprocessors, namely Intel ® and Advanced Micro Devices (AMD). Hereby Intel models and AMD models are used to distinguish computer models with different microprocessors.
Use this manual along with the advanced diagnostic tests to troubleshoot problems.
Important:
- This manual is intended only for trained service technicians who are familiar with products. Use this manual along with the advanced diagnostic tests to troubleshoot problems effectively.
- Depending on the model, some hardware configuration and software programs might not be available on the computer. Some statements in this manual might not be applicable to the computer.
- Before servicing a product, be sure to read all the information under Chapter 1 'Safety information' on page 1 and Chapter 2 'Important service information' on page 19.
Chapter 1. Safety information
This chapter presents following safety information that you need to be familiar with before you service a notebook computer.
- 'General safety' on page 1
- 'Electrical safety' on page 1
- 'Safety inspection guide' on page 3
- 'Handling devices that are sensitive to electrostatic discharge' on page 3
- 'Grounding requirements' on page 4
- 'Safety notices (multilingual translations)' on page 4
General safety
Follow these rules to ensure general safety:
- Observe good housekeeping in the area of the machines during and after maintenance.
- When lifting any heavy object:
- Ensure that you can stand safely without slipping.
- Distribute the weight of the object equally between your feet.
- Use a slow lifting force. Never move suddenly or twist when you attempt to lift.
- Lift by standing or by pushing up with your leg muscles; this action removes the strain from the muscles in your back. Do not attempt to lift any object that weighs more than 16 kg (35 lb) or that you think is too heavy for you.
- Do not perform any action that causes hazards to the customer, or that makes the equipment unsafe.
- Before you start the machine, ensure that other service technicians and the customer's personnel are not in a hazardous position.
- Place removed covers and other parts in a safe place, away from all personnel, while you are servicing the machine.
- Keep your tool case away from walk areas so that other people will not trip over it.
- Do not wear loose clothing