100 Diagrams
Popular Forum Questions
Ask a QuestionThere are no questions. Be the first to ask a question!
Documents
Models
VIO17-A
Background
The Yanmar ViO17-A is a 1.7-ton class, diesel-powered mini excavator sold in the US. Yanmar's US parts catalog for the model was first published in November 2014 and covers machines from machine number A0501. The ViO17-1E, announced in August 2022, replaced it.
The ViO17-A has true zero tail swing, so no part of the upper housing extends past the tracks as it rotates. Its hydraulic undercarriage retracts to 37 inches to fit through narrow openings and extends to 49 inches for stability while digging. The dozer blade has folding extensions to match the track width.
Standard equipment in Yanmar's 2020 specification sheet includes rubber tracks, boom swing, joystick pilot controls with a two-way control pattern selector, an arm-end auxiliary hydraulic valve, cylinder rod guards on the boom, arm, bucket, and blade cylinders, a four-pillar ROPS/FOPS canopy, a built-in boom light, and a travel alarm. Equipment can vary by machine.
Identification
Check the machine's identification plate for the model and machine number before ordering parts. Yanmar's parts catalog splits some parts at serial number M0F000/M0F001, including the exterior decal set.
The ViO17-A has a ViO17 decal on the rear body, an open four-pillar canopy, rubber tracks, and a front dozer blade. Yanmar's 2020 specification sheet shows the machine with a red boom and body and a black undercarriage. The ViO17-1E looks similar, so confirm the full model designation on the plate before using specifications or parts from this page.
Technical Specifications
These specifications come from Yanmar's 2020 ViO17-A specification sheet.
- Engine: Yanmar 3TNV74F-SPBV, water-cooled, three-cylinder diesel
- Rated output: 14.5 hp (10.8 kW) at 2,400 rpm
- Emissions rating: Tier 4 Final
- Operating weight with rubber tracks: 3,836 lb (1,740 kg)
- Maximum digging depth: 7 ft 7 in (2,310 mm)
- Maximum digging force, bucket/arm: 3,418 lb (15.2 kN) / 1,918 lb (8.5 kN)
- Track width: Hydraulically adjustable from 950 to 1,280 mm
- Blade width x height: 1,280/950 x 235 mm
- Tail swing radius: 640 mm
- Boom swing angle: 42 degrees left, 65 degrees right
- Swing speed: 9.5 rpm
- Travel speed: 2.7/1.3 mph (4.3/2.1 km/h)
- Ground contact pressure: 4.1 psi (28.6 kPa)
- Hydraulic pump capacity: 17.6 + 17.6 + 13.2 + 11.2 L/min
- Auxiliary hydraulic flow: 30.8 L/min at 2,200 rpm, 17.5 L/min at 1,250 rpm, 2,625 psi (18.1 MPa)
- Fuel tank capacity: 5.3 gallons (20 L)