Camera Mounting Bracket
Popular Forum Questions
Ask a QuestionThere are no questions. Be the first to ask a question!
Tools
These are some common tools used to work on this device. You might not need every tool for every procedure.
Specifications
- Resolution: 1080p (1920x1080)
- Field of View: 360 horizontal, 93 vertical (pan/tilt)
- WiFi: 2.4 GHz 802.11 b/g/n
- Bluetooth: BLE v4.2
- Power: 5V 2A via USB Micro-B
- Storage: MicroSD card slot
- Audio: Two-way (built-in mic and speaker)
- Night Vision: Color night vision with 850nm IR LEDs
Internal Components
- SoC: Ingenic T31
- SPI Flash: ZB25VQ128A (16 MB, ZBIT Semiconductor)
- WiFi/BLE Module: AltoBeam ATBM6031
- Image Sensor: GC2053 (Galaxycore, 1/2.9" 2MP CMOS)
- Pan Motor: 24BYJ48 variant 461C (Shenzhen Yinuo Motor)
- Tilt Motor: 24BYJ48 variant 461D (Shenzhen Yinuo Motor)
- Main Board: DF3-MCU-501-V2.3
- Camera Board: DF3V2-LEDP01 V1.0
- Sensor Board: DF3V2-SENSOR-V2.1
Identification
- Model: CP1000X
- FCC ID: 2AUIUWYZECP2A
- IC: 25466-WYZECP2A
- Based on: Wyze Cam Pan v2 (rebranded)
Troubleshooting
This device is a rebranded Wyze Cam Pan v2. The USB-A port present on the Wyze version has been removed on the Roku version. The UART debug header (GND, TX, RX, 5V) remains accessible on the main board.
