Scaner dosnt work , it's stick.
When i pick to scan , they scaner makes a sound like it's being stuck ando don't make the copy.
Is this a good question?
Score
0
846197
1 Answer
Rep: 241
4
That is common problem for this type (l3150, 3110, 3210) this problem cause by:
- Improper scanner attached to its pin.
- Hard stuff/heavy stuff felt down on to the scanner.
- Dust accumulate on the scanner tract.
Solution:
- Check ribbon scanner cable, whether it is torn uuo or not.
- Dissemble the scanner and clean the track, while repositioning the scanner correctly (don't miss even half millimetre).
Hope this will answer your questions.
Was this answer helpful?
Score
0
See for any paper jams etc, Head cleaning, ink charging, or ink drying is in progress. Check to see if the Pause light is flashing.
by Asha Kanta Sharma