Fix Your Stuff Community Store

Repair guides and support for Kenmore washing machines.

1859 Questions View all

Options

I have a Kenmore 796.4027. It comes up with an 'IE' error code.

I have a Model 796.4027. It comes up with an 'IE' error code. I don't see this in any links. The washer gets to the rinse cycle, motor seems to groan a little before rocking drum 1/4 turn. Timer stays put. Eventually times out with 'IE' code. We end up restarting, sometimes with drum full of water. It usually cycles through on second run through.

ANY HELP?

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

Hi @cb3lazybw

You washer is a rebadged LG model made for Kenmore. This is based on that it is made up from only LG parts

Here's a link that shows what to check when you have an IE error code in LG machines that may help.

If everything mentioned in the link is OK, perhaps try selecting a cold or hot only wash to see if it still occurs.

If it only happens on one temperature and not the other it may be a faulty water inlet valve in the washer.

Was this answer helpful?

Yes No
Score 1
Add a comment

Add your answer

CB3LazyBW will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 9

Past 30 Days: 37

All Time: 73