Computers that generally don't include an integrated display, and are meant to be stationary.

981 Questions View all

(System crashing)Computer gets power, but monitor says no signal

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000007f (0x00000000, 0x00000000, 0x00000000, 0x00000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 022512-20342-01.

plz help me

windows 7 32bit

dh61ww =core i5 2320

500gb hdd seagate

4gb transcend single stick

HD6750 ddr5 1Gb

zeb-450w gold series

Answered! View the answer I have this problem too

Is this a good question?

Score 1
Add a comment

1 Answer

Chosen Solution

The 0x0000007f, UNEXPECTED_KERNEL_MODE_TRAP, error code means a trap occurred in kernel mode and the trap is either one the kernel is not allowed to have or is always fatal. That trap is defined with the first parameter 0x00000000 as being a DIV instruction is executed and the divisor is 0.

The most likely causes of this error are overclocking something on the board (CPU, RAM, video or a bus) or low-level hardware corruption, such as corrupted/bad RAM or RAM slot - RAM includes video RAM.

Try reseating your RAM and video card. If that doesn't help try your RAM in another slot. If that doesn't help try different RAM. If that doesn't help try a different video card or try the video card in a different machine. If you are overclocking something, bring the system back to normal pace. If you have put RAM in the system that is in anyway different (faster, larger, timings, etc..) than what the motherboard manufacturer says is compatible with the system or the slot change the RAM following their requirements.

Was this answer helpful?

Score 2
Add a comment

Add your answer

karty will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 639