ribbon cable connector #3 has damaged pins
I replaced the battery, now I cannot connect ribbon cable #3. The pins are bent. What can I do now?
Is this a good question?
I replaced the battery, now I cannot connect ribbon cable #3. The pins are bent. What can I do now?
Is this a good question?
If they are broken Lee, you'd need to replace the connector. This is done by desoldering the broken pieces, and soldering on a new connector. There is no other way around the soldering.
Was this answer helpful?
tru dat... also i wouldn't recommend doing it yourself if you don't have experience soldering.
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 860
2 Comments
try using a toothpick and a good lens to GENTLY straighten them. they are really fragile!
by pollytintop
Pin broken. How do I get this fixed?
by Lee Portnoff