Skip to main content

Repair information and guides for the iPhone 6S released by Apple on September 25, 2015. Models: A1688, A1633

2694 Questions View all

My iPhone won't turn on after the battery drained totally

So my iphone 6s won’t charge the battery if it’s fully drained. I tried to change the battery but I got the same results. If I try to charge the battery to another iphone 6s will works. And if the battery have some juice and I put to my iphone that does not wanna charge will work. Also the phone will charge my battery if they have some power. What can be the problem if my phone charge the battery if it’s not 100% drained, but if it’s dead will not turn on to charge it?

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

Theres two things that are common in this situation

  1. The battery protection circuit was triggered and the battery was disconnected from the phone to prevent over discharge. you can verify if this is the case by measuring the battery with a multi meter and seeing a voltage present (usually its 3 or more volts)
  2. The tristar chip has been damaged and will not charge the battery when it gets too low. if the battery displays a voltage on a meter this is the most likely cause and requires micro soldering to repair.

Small note; it is possible for residual power to be drawn from the phone and cause the battery to drop below safe levels even when off, triggering the over discharge protection. This is much harder to test for and requires powering the phone while measuring current draw.

Was this answer helpful?

Score 1

2 Comments:

and the battery drain much faster even in I left the phone on the sleep mode. Ofc the battery have 82% life.

by

I tried to charge the battery on another 6s and worked. So I guess the problem is from motherboard.

by

Add a comment

Add your answer

richardytb1 will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 11

All Time: 282