Skip to main content

4-inch iPhone released in March 2016 with similar hardware specifications to the 6S. Available in Silver, Space Grey, Gold, or Rose Gold with 16/32/64/128 GB storage options. Model: A1662 and A1723

1049 Questions View all

iPhone won't turn on, just vibrates 3 times when plugged in.

Hello,

I recently cracked my screen. The phone was functioning since the lcd was displaying lines when turned on. The alarm worked fine and people could call me. All that was broken was the display.

I purchased a new screen and replaced it. While replacing the screen I accidentally broke the home button connector, so I also replaced the home button.

Now the phone does not respond to anything after assembly. It doesn’t boot up. Does not respond to DFG-mode, the mute switch does nothing. I have quadrible checked all the connectors and everything seems to be connected just fine (I followed several YouTube guides)

The only sign of life is when I plug it into the computer - then it vibrates 3 times.

I have tried to connect back to the old screen, but now it too stays black.

Is the phone dead? Do I move on and buy a new one or is there still hope?

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Was the battery unplugged during the screen repair? If the screen cables were unplugged or plugged while battery was connected chances are the backlight circuit went bad on the logic board of the phone.

You can shine a flashlight on the screen and see if you can make up a dim image display on the screen indicating no backlight.

A reputable repair shop can fix this for you.

Was this answer helpful?

Score 0

1 Comment:

The battery was plugged in during the repair.

The phones mute switch doesn’t work and I cannot see anything with a flashlight.

What does that mean?

by

Add a comment

Add your answer

Rob will be eternally grateful.
View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 16

All Time: 1,209