Fix Your Stuff Community Store

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Questions View all

Options

Replaced screen, original home button doesn't work with new display.

I replaced my display with an iFixit kit, keeping my original home button.

Once completed, the home button would not respond and I got a `no touch id` error.

I then re-installed the old screen with the same home button and everything worked.

Could this be a faulty replacement part?

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

You’ll need to transfer this part from the old screen to the replacement screen. Sounds like the interconnect ribbon cable for home button is no good:

iPhone 6 LCD and Digitizer Replacement

Refer to step 38 for the part in question.

Was this answer helpful?

Yes No
Score 3

1 Comment:

Thanks a lot for the solution. It worked out perfectly.

by

Add a comment

Add your answer

Feik will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 34