Fix Your Stuff Community Store

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Questions View all

Options

Speaker and earphones don't work after replacing Lightning Connector

After replacing my Lightning Connector Assembly and battery multiple things are no longer working.

  • Bottom Speaker
  • Headphone Jack not working
  • Vibrator

Also after opening it back up and redoing all of the cables the right side of earphones started working.

When talking to someone on the phone everything works fine both ways and the charging port also works fine.

Edit: Fixed, not quite sure what i did but after i took it apart Again and put everything back everything was just fixed. Sorry i cant help if you have this problem.

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

The only thing I can think that would cause this is there are gold contact pads that have to line up for the vibrate motor and the loud speaker to work when installing the flex cable for the charge port and headphone jack. You could have cleared a grounding issue as well once you reseated everything a few times.

Was this answer helpful?

Yes No
Score 1
Add a comment

Add your answer

Kodi Souter will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 2

All Time: 123