Skip to main content

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Questions View all

iPhone 6 & DSPS.

Hi Guys i have an DCPS W.E.R 853D.

When i connect iphone , after 3/4 minutes, iphone restart automatically.

I check the phone with Iphone battery , everything is well.

I try also with different cable but phone restart again.

The voltage on display remain 3,8

The current move from 0,4 to 0,9.

Any body have suggestion plz.

Thanks

Answered! View the answer I have this problem too

Is this a good question?

Score 0
1 Comment

Do I understand correctly that the phone works fine with a battery but not a DCPS?

by

Add a comment

2 Answers

Chosen Solution

Yes Mnho.. Right.. i found the problem.. The cable is fault.. i change it.. Thanks a lot :)

Was this answer helpful?

Score 0
Add a comment
Most Helpful Answer

Most DCPS cables don’t have data lines only positive and negative so battery will clip after a min or so due to not recognizing a gas gauge or swi line that normally is connected with battey. You can read more about battey data on this site.

https://www.aonemobiles.com.au/2018/06/i...

Was this answer helpful?

Score 1
Add a comment

Add your answer

AGS will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 58