Fix Your Stuff Community Store

Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White. This page aims to help users troubleshoot, fix, and seek help for the iPhone 4.

2375 Questions View all

Options

little black holder that the battery cable attaches too.

Block Image

Block Image

Block Image

well i have been having problems with my iphone 4. my iphone will not turn on, so i opened it up and saw that the black holder that the battery cable attaches too had broken off. i am wondering what i need to buy and i will install it.

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 1
4 Comments

Are you talking about the ground that touches the back plate?

by

Try taking a picture of what you're talking about.

by

No the battery wire connect to a slot on the mother board and it's black that's what broke off.

by

there are pics of it.

by

Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

That is your battery connector. You ripped it off the board when trying to remove the battery. It can be fixed, as I have done it before. You will need a very small iron though and a microscope. Also, if any solder pads that are lifted or removed, it may be harder to repair. You will have to recover the leads and then solder to it.

Was this answer helpful?

Yes No
Score 2
Add a comment

Add your answer

nick will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 2,913