Fix Your Stuff Community Store

Repair guides and support for vacuums by Dyson, including upright, canister, and handheld vacuums.

424 Questions View all

Options

No suction at floor, but wand works

My DC33 has no suction at the floor but the wand continues to work properly. I have cleaned the brush roller and both filters, as well as the joints I could get to. No obstructions detected. Is there anything else I can try?

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 2
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

Hi @sschmit ,

Just double checking that you looked at the places shown in the image below.

Block Image

(click on image to enlarge for better viewing)

If you have check the suction at the point shown by the arrows (not sure which is the inlet).

Be safety aware when you do this as the machine will be powered on.

Was this answer helpful?

Yes No
Score 2
Add a comment

Add your answer

Suzanne will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 29

Past 30 Days: 121

All Time: 22,184