Two parts can't put back and four light are red and all flash
I open the camera cause battery leakage.
And found out cable are brake off.
After connect the cable drop two parts on table...
https://drive.google.com/file/d/1ALn7PkE...
I am not sure where should be put back.
And the four lights are all flash and red when I turn on the camera.
https://drive.google.com/file/d/1lRl3TFc...
And the mode can't change it will stuck at cloud when turn on.
https://drive.google.com/file/d/1rx_BUOX...
If turn off the mode can switch to the end.
Please help me if you know the answer or experience.
Thanks
Is this a good question?