Skip to main content

The OontZ Angle 3 is a high quality, lightweight speaker made by Cambridge SoundWorks.

17 Questions View all

Why won't the Oontz Angle 3 speaker connect with PC Bluetooth?

The connection worked previously, I have no idea what has changed.

The PC sees the speaker, but the speaker doesn't play.

I tested the PC with AUX cable which works, I am also able to connect the speaker through Bluetooth on my phone.

I have checked all my PC settings and have no idea what else to look.


Answer this question I have this problem too

Is this a good question?

Score 0


This happened to me, too, recently. Just after updating my PC, the Oontz Angle 3 would only be recognized as "Bluetooth Headset" and would fail to connect.

I have obviously removed the Oontz Angle Device 3 and tried to reconnect it.

I have also deleted/reinstalled any/all Bluetooth drivers on my computer.

The Oontz connects perfectly well on my iPhone, however.

What is going on?


I still don't know the reason, but it worked for me when I uninstaled the speaker and installed it again. It happened to me a few times the Bluetooth connection didn't work without this "manual reset". So, go to devices, installations, and remove and then again add the speaker. I hope this helps you too!


Add a comment

1 Answer

In my case, the computer was able to identify the speaker but it would not connect, giving a message that the device was not responding. After trying a number of other possible fixes, such as deleting it from the computer memory, rebooting the computer, turning off the firewall, I turned off the speaker and even disconnected it from the USB cable. I let it sit, powered down, for about 3 minutes, and then restarted the process. It connected without a problem.

Was this answer helpful?

Score 0
Add a comment

Add your answer

Kristina Bogataj will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 19

All Time: 3,270