Fix Your Stuff Community Store

GSM iPad 2 with 16, 32, or 64 GB of storage, and a Dual Core A5 Processor. Model Number A1396. Repair is complicated and requires heat and prying.

152 Questions View all

Options

Digitizer won’t respond to touch after being replaced

I repaired an iPad 2 by replacing a digitizer before peeling back the adhesive strips I tested it. The new digitizer it will not respond to touch. I made sure all of my ribbon cables were connected properly and it still won’t respond to touch.

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

Chances are the digitiser is faulty if you tried testing it before installation. As you said you have fully plugged in the digitizer ribbon cable.

Was this answer helpful?

Yes No
Score 2

1 Comment:

Thank you for your advice. I have solved my problem. I really appreciate your advice in solving my problem.

by

Add a comment

Add your answer

Pbearbear will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 48