Also known as EOS 600D and released in March 2011, this camera can be identified by its SKU (SKU:5169BO32). This camera is a Canon Digital SLR with 18 megapixels.

40 Questions View all

I have a totally stripped screw on the body that won't come out

Block Image

Trying to self-repair my busted T3i SD card port but one of the screws that is right under the battery door of the camera is completely stripped so I can't get inside of the camera. Its deep in the hole so I can't use any sort of dremel, plus the rubber band/super glue trick was not successful. The screw is very small and the strip has become a complete circle. Any help would appreciated! Thanks!

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

Hi!

You could try using a drill with a very fine tip. Just drill into the screw until the head becomes separate from the rest; then applying some force, separate the two parts.

Was this answer helpful?

Score 3
Add a comment

Add your answer

Sahil Kumar will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 4

All Time: 137