Released on September 19, 2014, this 5.5" screen iPhone is the larger version of the iPhone 6.

1245 Questions View all

Screen is fine but touch doesn't work

Hello friends! I'm having a weird issue on my screen replacement. I bought this iphone some weeks ago with the screen broken, and I just bought a new one and fixed it.

Today I opened my iphone again since the screen on the right corner wasn't fixed good.

After this, the touch never worked again until I noticed that, without the camera flex it works. The point is: Now the touch screen only works without the camera flex turned into the mother board and I can't understand how ...

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

2 Answers

Chosen Solution

There could be a short in the camera cable from being pinched or bent too far during the repair. I've fixed 1000's of devices and have seen some real crazy things happen. I have particularly seen front cameras malfunction for no apparent reason and cause this issue and the red screen of death on boot. You can grab a new camera for testing for cheap off eBay or get one here on iFixit.

Was this answer helpful?

Score 1
Add a comment
Most Helpful Answer

Hello

Look closely if they have any small screw or any durt on the logique board and look if you are putting the connector cable of camera on the right place and

Good luck

Was this answer helpful?

Score 1
Add a comment

Add your answer

André Jóia will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 66